Norkan Industrial Services Store
Original Color Chips
Negative Air Machine Superstore
Discount Visqueen
Epoxy Superstore
NK Baxter
Paint Superstore

CUTTING TOOLS: NICHOLSON SAW BLADES

Nicholson Bi-Metaloy Hand Hacksaw Blades

Nicholson Bi-Metaloy Hand Hacksaw Blades

FEATURES:
• Molybdenum alloy tool steel edge
• Tough flexible high carbon steel backing
• Lasts twice as long as high-speed steel
• Lasts up to ten times longer than carbon steel
• Operates 20% to 50% faster
• High tooth hardness and shock resistance

General Tooth Recommendations:

14 Tooth:
For cutting stock 1"/25.40mm or over in cross section. For soft materials where maximum chip clearance is needed.

18 Tooth:
For general shop use, when same blade is used on several jobs.

24 Tooth:
For cross section 1/16"/1.58mm – 1/4"/6.35mm such as pipe, angles, small drill rod.

32 Tooth:
To cut stock up to 1/16"/1.58mm such as light tubing, sheet metal, BX.

At least three teeth should be in contact with the work at all times.

Part No. Set Type Length Width Gauge Teeth Per Inch
(Inches) (mm) (Inches) (mm) (Inches) (mm)
62635 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 18
62659 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 24
62683 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 32
62706 RAKER 12" 304mm 1/2" 12.70mm .025" .65mm 14
62723 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 18
62749 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 24
62776 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 32

VIEW IN OUR STORE

Nicholson Solid Flexible Carbon Steel Hand Hacksaw Blades

Nicholson Solid Flexible Carbon Steel Hand Hacksaw Blades

FEATURES:
• Solid high carbon steel
• Tempered to provide hard edge with flexible back
• Specially hardened to induce toughness
• Economy blade for sawing light to medium-hard materials
• A good balance of wear resistance and mechanical shock absorbing properties
• Virtually unbreakable

General Tooth Recommendations:

14 Tooth:
For cutting stock 1"/25.40mm or over in cross section. For soft materials where maximum chip clearance is needed.

18 Tooth:
For general shop use, when same blade is used on several jobs.

24 Tooth:
For cross section 1/16"/1.58mm – 1/4"/6.35mm such as pipe, angles, small drill rod.

32 Tooth:
To cut stock up to 1/16"/1.58mm such as light tubing, sheet metal, BX.

At least three teeth should be in contact with the work at all times.

Part No. Set Type Length Width Gauge Teeth Per Inch
(Inches) (mm) (Inches) (mm) (Inches) (mm)
63103 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 18
63112 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 24
63124 WAVY 10" 254mm 1/2" 12.70mm .025" .65mm 32
63136 RAKER 12" 304mm 1/2" 12.70mm .025" .65mm 14
63145 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 18
63158 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 24
63171 WAVY 12" 304mm 1/2" 12.70mm .025" .65mm 32

VIEW IN OUR STORE